Bug #6036
closed
Test failures in Fedora Rawhide/17
Added by Anonymous about 12 years ago. Updated over 11 years ago.
Description
Hi, I'm getting these test failures [1] on both Fedora 17 and Rawhide. The tests unfortunately don't run all, because there is probably an endless loop in one of them, which I can't reproduce when running tests separately (is there a way to output each test file in 'make test', so that I can find the file with the endless loop?).
BTW I'm running tests with GDBM 1.10 and some tests are skipped claiming I have GDBM 1.8 - which is probably an issue with the regexps matching GDBM version.
Regards,
Bohuslav "Slavek" Kabrda
Updated by akr (Akira Tanaka) about 12 years ago
- Status changed from Open to Closed
- % Done changed from 0 to 100
This issue was solved with changeset r34646.
Bohuslav, thank you for reporting this issue.
Your contribution to Ruby is greatly appreciated.
May Ruby be with you.
- test/dbm/test_dbm.rb: fix skip condition for libgdbm 1.8.0 or prior.
reported by Bohuslav Kabrda.
[ruby-core:42685] [Bug #6036]
Updated by Anonymous about 12 years ago
Well, thanks for fixing the gdbm support, but the other 16 failures and 20 errors are the main reason why I reported the bug... Could you have a look at that?
Thanks.
Updated by naruse (Yui NARUSE) about 12 years ago
- Status changed from Closed to Assigned
- Assignee set to vo.x (Vit Ondruch)
Bohuslav Kabrda wrote:
Well, thanks for fixing the gdbm support, but the other 16 failures and 20 errors are the main reason why I reported the bug... Could you have a look at that?
Thanks.
Vit, could you inspect this?
Updated by vo.x (Vit Ondruch) about 12 years ago
Tests passes with following command: "make check TESTS="-v -x test_pathname.rb -x test_drbssl.rb -x test_parse.rb -x test_x509cert.rb"
The test_drbssl.rb and test_x509cert.rb might be related to the OpenSSL changes?
Updated by vo.x (Vit Ondruch) about 12 years ago
The test_pathname appears to hang somewhere. The TestPathname#test_pathsubext_510 is the last output which appears in my log, however there might be some entries lost due to not flushed log.
Updated by akr (Akira Tanaka) about 12 years ago
2012/2/20 Vit Ondruch v.ondruch@tiscali.cz:
The test_pathname appears to hang somewhere. The TestPathname#test_pathsubext_510 is the last output which appears in my log, however there might be some entries lost due to not flushed log.
I installed Fedora but I couldn't reproduce the problem.
% ./ruby test/pathname/test_pathname.rb
Run options:
Running tests:¶
...(snip)...
Finished tests in 0.520247s, 505.5290 tests/s, 1039.8904 assertions/s.
263 tests, 541 assertions, 0 failures, 0 errors, 0 skips
% ./ruby -v
ruby 1.9.3p134 (2012-02-19 revision 34690) [i686-linux]
% lsb_release -a
LSB Version: :core-4.0-ia32:core-4.0-noarch
Distributor ID: Fedora
Description: Fedora release 18 (Rawhide)
Release: 18
Codename: Rawhide
Tanaka Akira
Updated by vo.x (Vit Ondruch) about 12 years ago
Akira Tanaka wrote:
2012/2/20 Vit Ondruch v.ondruch@tiscali.cz:
The test_pathname appears to hang somewhere. The TestPathname#test_pathsubext_510 is the last output which appears in my log, however there might be some entries lost due to not flushed log.
I installed Fedora but I couldn't reproduce the problem.
% ./ruby test/pathname/test_pathname.rb
Run options:Running tests:¶
...(snip)...
Finished tests in 0.520247s, 505.5290 tests/s, 1039.8904 assertions/s.
263 tests, 541 assertions, 0 failures, 0 errors, 0 skips
% ./ruby -v
ruby 1.9.3p134 (2012-02-19 revision 34690) [i686-linux]
% lsb_release -a
LSB Version: :core-4.0-ia32:core-4.0-noarch
Distributor ID: Fedora
Description: Fedora release 18 (Rawhide)
Release: 18
Codename: RawhideTanaka Akira
I am afraid that the test results differs if you run the whole test suite in once or if you run just part of the test suite, as you did.
Updated by akr (Akira Tanaka) about 12 years ago
2012/2/22 Vit Ondruch v.ondruch@tiscali.cz:
I am afraid that the test results differs if you run the whole test suite in once or if you run just part of the test suite, as you did.
I see.
The hang is reproduced on my environment.
However the hang is occur at TestProcess#test_abort, not
TestPathname#test_pathsubext_510.
|TestProc#test_to_proc = 0.00 s = .
|TestProc#test_to_s = 0.00 s = .
|TestProcess#test_abort =
^C/home/akr/ruby/193/ruby/test/drb/ut_array_drbssl.rb:22:in join': Interrupt | from /home/akr/ruby/193/ruby/test/drb/ut_array_drbssl.rb:22:in '
|/home/akr/ruby/193/ruby/test/drb/ut_drb_drbssl.rb:23:in join': Interrupt | from /home/akr/ruby/193/ruby/test/drb/ut_drb_drbssl.rb:23:in '
|
|
|Finished tests in 3031.769106s, 2.1611 tests/s, 593.4136 assertions/s.
|
| 1) Failure:
|test_dsig_algorithm_mismatch(OpenSSL::TestX509Certificate)
[/home/akr/ruby/193/ruby/test/openssl/test_x509cert.rb:175]:
|OpenSSL::X509::CertificateError expected but nothing was raised.
|...
After ^C, bactrace shows drb.
I think the problem is caused by drb tests.¶
Tanaka Akira
Updated by vo.x (Vit Ondruch) about 12 years ago
Akira Tanaka wrote:
2012/2/22 Vit Ondruch v.ondruch@tiscali.cz:
I am afraid that the test results differs if you run the whole test suite in once or if you run just part of the test suite, as you did.
I see.
The hang is reproduced on my environment.
However the hang is occur at TestProcess#test_abort, not
TestPathname#test_pathsubext_510.
Yes, that might be. I just noted that the "TestPathname#test_pathsubext_510" was last entry in my log, so there might be other tests passed, but not flushed yet.
|TestProc#test_to_proc = 0.00 s = .
|TestProc#test_to_s = 0.00 s = .
|TestProcess#test_abort =
^C/home/akr/ruby/193/ruby/test/drb/ut_array_drbssl.rb:22:injoin': Interrupt | from /home/akr/ruby/193/ruby/test/drb/ut_array_drbssl.rb:22:in'
|/home/akr/ruby/193/ruby/test/drb/ut_drb_drbssl.rb:23:injoin': Interrupt | from /home/akr/ruby/193/ruby/test/drb/ut_drb_drbssl.rb:23:in'
|
|
|Finished tests in 3031.769106s, 2.1611 tests/s, 593.4136 assertions/s.
|
| 1) Failure:
|test_dsig_algorithm_mismatch(OpenSSL::TestX509Certificate)
[/home/akr/ruby/193/ruby/test/openssl/test_x509cert.rb:175]:
|OpenSSL::X509::CertificateError expected but nothing was raised.
|...After ^C, bactrace shows drb.
I think the problem is caused by drb tests.¶
Tanaka Akira
That makes sense. I now testing with drb tests disabled, and it does not hang.
Updated by vo.x (Vit Ondruch) about 12 years ago
It seems that the errors are due to updated openssl library: openssl-1.0.1-0.1.beta2.fc17 ... there is a lot of errors around, Python, MySql ...
Updated by vo.x (Vit Ondruch) about 12 years ago
It seems that the patch [1] changes the behavior of openssl and makes the test_x509cert.rb fail:
- Failure:
test_dsig_algorithm_mismatch(OpenSSL::TestX509Certificate) [test/openssl/test_x509cert.rb:175]:
OpenSSL::X509::CertificateError expected but nothing was raised.
I also notified Fedora's openssl maintainer about these issues [2].
[1] http://cvs.openssl.org/filediff?f=openssl/crypto/asn1/a_sign.c&v1=1.21.4.1&v2=1.21.4.2
[2] https://bugzilla.redhat.com/show_bug.cgi?id=797217
Updated by naruse (Yui NARUSE) about 12 years ago
Could you make another ticket ans assign it to Martin Boßlet about openssl?
Updated by vo.x (Vit Ondruch) about 12 years ago
- Status changed from Assigned to Closed