Bug #1057
closedripper does not compile with mingw
Added by cfis (Charlie Savage) over 15 years ago. Updated over 13 years ago.
Description
=begin
Mingw, vista, gcc 3.4.5
When building ruby 1.9.1-rc2:
make[1]: Entering directory /usr/src/ruby-1.9.1-rc2/ext/ripper' make[1]: *** No rule to make target
lex.c', needed by ripper.o'. Stop. make[1]: Leaving directory
/usr/src/ruby-1.9.1-rc2/ext/ripper'
make: *** [exts] Error 1
In the makefile:
ripper.o: ripper.c lex.c eventids1.c eventids2.c eventids2table.c \
$ flex --version
flex 2.5.33
$ bison --version
bison (GNU Bison) 2.3
But lex.c is nowhere to be found. Simply removing it from the makefile fixes the issue. So:
ripper.o: ripper.c eventids1.c eventids2.c eventids2table.c \
Is this the right solution?
=end
Updated by matz (Yukihiro Matsumoto) over 15 years ago
- Status changed from Open to Closed
- % Done changed from 0 to 100
=begin
Applied in changeset r21783.
=end
Updated by matz (Yukihiro Matsumoto) over 15 years ago
- Status changed from Closed to Open
=begin
re-opened.
=end
Updated by matz (Yukihiro Matsumoto) over 15 years ago
- Status changed from Open to Closed
=begin
Applied in changeset r21787.
=end
Updated by cfis (Charlie Savage) over 15 years ago
=begin
Thanks Matz - fix verified.
=end
Updated by nobu (Nobuyoshi Nakada) over 15 years ago
- Status changed from Closed to Open
=begin
Hi,
At Tue, 27 Jan 2009 02:53:14 +0900,
Charlie Savage wrote in [ruby-core:21570]:
Mingw, vista, gcc 3.4.5
What do you call Mingw? gcc -mno-cygwin on cygwin, or gcc on
msys?
And what configure options did you use?
--
Nobu Nakada
=end
Updated by cfis (Charlie Savage) over 15 years ago
=begin
gcc on msys.
config options for ruby:
./configure --prefix=c:/Development/ruby-1.9.1-mingw
=end
Updated by nobu (Nobuyoshi Nakada) over 15 years ago
=begin
Hi,
At Tue, 27 Jan 2009 17:22:42 +0900,
Charlie Savage wrote in [ruby-core:21602]:
gcc on msys.
config options for ruby:
./configure --prefix=c:/Development/ruby-1.9.1-mingw
How are macros "top_srcdir", "srcdir", "topdir", "hdrdir",
"arch_hdrdir" defined in ext/ripper/Makefile?
I suspect it might be a VPATH problem of make on msys. If it
is true, the trunk r21749 or later could compile.
Anyway, the fix of ext/ripper/depend was wrong and has been
reverted.
--
Nobu Nakada
=end
Updated by cfis (Charlie Savage) over 15 years ago
=begin
Hi Nobu,
How are macros "top_srcdir", "srcdir", "topdir", "hdrdir",
"arch_hdrdir" defined in ext/ripper/Makefile?
I pasted the generated make file below
I suspect it might be a VPATH problem of make on msys. If it
is true, the trunk r21749 or later could compile.
Anyway, the fix of ext/ripper/depend was wrong and has been
reverted.
I just recompiled against trunk - and it works fine now.
Thanks,
Charlie
SHELL = /bin/sh
Start of system configuration section.¶
top_srcdir = $(topdir)/.
srcdir = $(top_srcdir)/ext/ripper
topdir = ../..
hdrdir = $(top_srcdir)/include
arch_hdrdir = $(extout)/include/$(arch)
VPATH = $(srcdir):$(arch_hdrdir)/ruby:$(hdrdir)/ruby:$(topdir):$(top_srcdir)
RUBYLIB = -
RUBYOPT = -r$(top_srcdir)/ext/purelib.rb
DESTDIR = C:
prefix = $(DESTDIR)/Development/ruby-1.9.1-mingw
exec_prefix = $(prefix)
bindir = $(exec_prefix)/bin
sbindir = $(exec_prefix)/sbin
libexecdir = $(exec_prefix)/libexec
datarootdir = $(prefix)/share
datadir = $(datarootdir)
sysconfdir = $(prefix)/etc
sharedstatedir = $(prefix)/com
localstatedir = $(prefix)/var
includedir = $(prefix)/include
oldincludedir = $(DESTDIR)/usr/include
docdir = $(datarootdir)/doc/$(PACKAGE)
infodir = $(datarootdir)/info
htmldir = $(docdir)
dvidir = $(docdir)
pdfdir = $(docdir)
psdir = $(docdir)
libdir = $(exec_prefix)/lib
localedir = $(datarootdir)/locale
mandir = $(datarootdir)/man
sitedir = $(libdir)/$(RUBY_INSTALL_NAME)/site_ruby
vendordir = $(libdir)/$(RUBY_INSTALL_NAME)/vendor_ruby
rubyhdrdir = $(includedir)/$(RUBY_INSTALL_NAME)-$(ruby_version)
sitehdrdir = $(rubyhdrdir)/site_ruby
vendorhdrdir = $(rubyhdrdir)/vendor_ruby
rubylibdir = $(libdir)/$(ruby_install_name)/$(ruby_version)
archdir = $(rubylibdir)/$(arch)
sitelibdir = $(sitedir)/$(ruby_version)
sitearchdir = $(sitelibdir)/$(sitearch)
vendorlibdir = $(vendordir)/$(ruby_version)
vendorarchdir = $(vendorlibdir)/$(sitearch)
CC = gcc
CXX = g++
LIBRUBY = lib$(RUBY_SO_NAME).dll.a
LIBRUBY_A = lib$(RUBY_SO_NAME)-static.a
LIBRUBYARG_SHARED = -l$(RUBY_SO_NAME)
LIBRUBYARG_STATIC = -l$(RUBY_SO_NAME)-static
OUTFLAG = -o
COUTFLAG = -o
RUBY_EXTCONF_H = extconf.h
cflags = $(optflags) $(debugflags) $(warnflags)
optflags = -O2
debugflags = -g
warnflags = -Wall -Wno-parentheses
CFLAGS = $(cflags)
INCFLAGS = -I. -I$(arch_hdrdir) -I$(hdrdir) -I$(srcdir) -I$(topdir)
-I$(top_srcdir)
DEFS =
CPPFLAGS = -DRUBY_EXTCONF_H="$(RUBY_EXTCONF_H)"
-Ic:/Development/msys/local/include $(DEFS) $(cppflags)
CXXFLAGS = $(CFLAGS) $(cxxflags)
ldflags = -L. -Lc:/Development/msys/local/lib
dldflags = -Wl,--enable-auto-image-base,--enable-auto-import
archflag =
DLDFLAGS = $(ldflags) $(dldflags) $(archflag)
LDSHARED = gcc -shared $(if $(filter-out -g -g0,$(debugflags)),,-s)
LDSHAREDXX = g++ -shared $(if $(filter-out -g -g0,$(debugflags)),,-s)
AR = ar
EXEEXT = .exe
RUBY_INSTALL_NAME = ruby
RUBY_SO_NAME = msvcrt-ruby191
arch = i386-mingw32
sitearch = i386-msvcrt
ruby_version = 1.9.1
ruby = $(topdir)/miniruby.exe -I'$(topdir)' -I'$(top_srcdir)/lib'
-I'$(extout)/$(arch)' -I'$(extout)/common' -I./- -I'$(top_srcdir)/ext'
-rpurelib.rb
RUBY = $(ruby)
RM = rm -f
RM_RF = $(RUBY) -run -e rm -- -rf
RMDIRS = $(top_srcdir)/tool/rmdirs
MAKEDIRS = mkdir -p
INSTALL = /bin/install -c
INSTALL_PROG = $(INSTALL) -m 0755
INSTALL_DATA = $(INSTALL) -m 644
COPY = cp
End of system configuration section.¶
preload =
libpath = . $(topdir)
LIBPATH = -L. -L$(topdir)
DEFFILE =
CLEANFILES = mkmf.log ripper.y ripper.c ripper.E ripper.output y.output
eventids1.c eventids2table.c
DISTCLEANFILES =
DISTCLEANDIRS =
extout = $(topdir)/.ext
extout_prefix = $(extout)$(target_prefix)/
target_prefix =
LOCAL_LIBS =
LIBS = $(LIBRUBYARG_SHARED) -lshell32 -lws2_32
SRCS = ripper.c
OBJS = ripper.o
TARGET = ripper
DLLIB = $(TARGET).so
EXTSTATIC =
STATIC_LIB = $(TARGET).a
BINDIR = $(extout)/bin
RUBYCOMMONDIR = $(extout)/common
RUBYLIBDIR = $(RUBYCOMMONDIR)$(target_prefix)
RUBYARCHDIR = $(extout)/$(arch)$(target_prefix)
HDRDIR = $(extout)/include/ruby$(target_prefix)
ARCHHDRDIR = $(extout)/include/$(arch)/ruby$(target_prefix)
TARGET_SO = $(RUBYARCHDIR)/$(DLLIB)
CLEANLIBS = $(RUBYARCHDIR)/$(TARGET).so
CLEANOBJS = *.o *.bak
all: install
static: $(STATIC_LIB) install-rb
clean-rb-default::
clean-rb::
clean-so::
clean: clean-so clean-rb-default clean-rb
@-$(RM) $(CLEANLIBS) $(CLEANOBJS) $(CLEANFILES)
distclean-rb-default::
distclean-rb::
distclean-so::
distclean: clean distclean-so distclean-rb-default distclean-rb
@-$(RM) Makefile $(RUBY_EXTCONF_H) conftest.* mkmf.log
@-$(RM) core ruby$(EXEEXT) *~ $(DISTCLEANFILES)
@-$(RMDIRS) $(DISTCLEANDIRS)
realclean: distclean
install: install-so install-rb
install-so: $(RUBYARCHDIR)
install-so: $(RUBYARCHDIR)/$(DLLIB)
clean-so::
@-$(RM) $(RUBYARCHDIR)/$(DLLIB)
@-$(RMDIRS) $(RUBYARCHDIR)
install-rb: pre-install-rb install-rb-default
install-rb-default: pre-install-rb-default
pre-install-rb: Makefile
pre-install-rb-default: Makefile
pre-install-rb-default: $(RUBYLIBDIR)/ripper
install-rb-default: $(RUBYLIBDIR)/ripper/core.rb
$(RUBYLIBDIR)/ripper/core.rb: $(srcdir)/lib/ripper/core.rb
$(COPY) $(srcdir)/lib/ripper/core.rb $(@D)
clean-rb-default::
@-$(RM) $(RUBYLIBDIR)/ripper/core.rb
install-rb-default: $(RUBYLIBDIR)/ripper/filter.rb
$(RUBYLIBDIR)/ripper/filter.rb: $(srcdir)/lib/ripper/filter.rb
$(COPY) $(srcdir)/lib/ripper/filter.rb $(@D)
clean-rb-default::
@-$(RM) $(RUBYLIBDIR)/ripper/filter.rb
install-rb-default: $(RUBYLIBDIR)/ripper/lexer.rb
$(RUBYLIBDIR)/ripper/lexer.rb: $(srcdir)/lib/ripper/lexer.rb
$(COPY) $(srcdir)/lib/ripper/lexer.rb $(@D)
clean-rb-default::
@-$(RM) $(RUBYLIBDIR)/ripper/lexer.rb
install-rb-default: $(RUBYLIBDIR)/ripper/sexp.rb
$(RUBYLIBDIR)/ripper/sexp.rb: $(srcdir)/lib/ripper/sexp.rb
$(COPY) $(srcdir)/lib/ripper/sexp.rb $(@D)
clean-rb-default::
@-$(RM) $(RUBYLIBDIR)/ripper/sexp.rb
pre-install-rb-default: $(RUBYLIBDIR)
install-rb-default: $(RUBYLIBDIR)/ripper.rb
$(RUBYLIBDIR)/ripper.rb: $(srcdir)/lib/ripper.rb
$(COPY) $(srcdir)/lib/ripper.rb $(@D)
clean-rb-default::
@-$(RM) $(RUBYLIBDIR)/ripper.rb
clean-rb-default::
@-$(RMDIRS) $(RUBYLIBDIR)
@-$(RMDIRS) $(RUBYLIBDIR)/ripper
$(RUBYARCHDIR):
$(MAKEDIRS) $@
$(RUBYLIBDIR):
$(MAKEDIRS) $@
$(RUBYLIBDIR)/ripper:
$(MAKEDIRS) $@
site-install: site-install-so site-install-rb
site-install-so: install-so
site-install-rb: install-rb
.SUFFIXES: .c .m .cc .cxx .cpp .o
.cc.o:
$(CXX) $(INCFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(COUTFLAG)$@ -c $<
.cxx.o:
$(CXX) $(INCFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(COUTFLAG)$@ -c $<
.cpp.o:
$(CXX) $(INCFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(COUTFLAG)$@ -c $<
.c.o:
$(CC) $(INCFLAGS) $(CPPFLAGS) $(CFLAGS) $(COUTFLAG)$@ -c $<
$(RUBYARCHDIR)/$(DLLIB): $(OBJS) Makefile
@-$(RM) $(@)
@-$(MAKEDIRS) $(@D)
$(LDSHARED) -o $@ $(OBJS) $(LIBPATH) $(DLDFLAGS) $(LOCAL_LIBS) $(LIBS)
$(STATIC_LIB): $(OBJS)
@-$(RM) $(@)
$(AR) cru $@ $(OBJS)
@-ranlib $(DLLIB) 2> /dev/null || true
$(OBJS): $(RUBY_EXTCONF_H)
.SUFFIXES: .y .c
GEN = $(srcdir)/tools/generate.rb
SRC1 = $(top_srcdir)/parse.y
SRC2 = $(srcdir)/eventids2.c
BISON = bison
src: ripper.c eventids1.c eventids2table.c
ripper.o: ripper.c lex.c eventids1.c eventids2.c eventids2table.c
$(hdrdir)/ruby/ruby.h $(arch_hdrdir)/ruby/config.h
$(hdrdir)/ruby/defines.h $(hdrdir)/ruby/intern.h
$(hdrdir)/ruby/encoding.h $(hdrdir)/ruby/missing.h
$(hdrdir)/../node.h $(hdrdir)/ruby/oniguruma.h
$(hdrdir)/ruby/regex.h $(hdrdir)/ruby/st.h $(hdrdir)/ruby/util.h
.y.c:
$(BISON) -t -v -oy.tab.c $<
sed -f $(top_srcdir)/tool/ytab.sed -e "/^#/s!y.tab.c!$@!" y.tab.c > $@
@$(RM) y.tab.c
all: check
static: check
ripper.y: $(srcdir)/tools/preproc.rb $(top_srcdir)/parse.y
$(RUBY) $(srcdir)/tools/preproc.rb $(top_srcdir)/parse.y --output=$@
check: $(GEN) $(SRC1) $(SRC2)
$(RUBY) $(GEN) --mode=check --ids1src=$(SRC1) --ids2src=$(SRC2)
eventids1.c: $(srcdir)/tools/generate.rb $(SRC1)
$(RUBY) $(GEN) --mode=eventids1 --ids1src=$(SRC1) --output=$@
eventids2table.c: $(srcdir)/tools/generate.rb $(SRC2)
$(RUBY) $(GEN) --mode=eventids2table --ids2src=$(SRC2) --output=$@
Entries for Ripper maintainer¶
preproc: ripper.E
ripper.E: ripper.c
$(CC) -E $(CPPFLAGS) ripper.c | $(RUBY) $(srcdir)/tools/strip.rb > $@
Attachment: smime.p7s
=end