Bug #3540
closedIO.copy_stream fails to detect client disconnect w/sendfile
Added by normalperson (Eric Wong) about 14 years ago. Updated over 13 years ago.
Description
=begin
sendfile() may return with a short write upon a client disconnect. Instead of
retrying and getting an error, Ruby tries to force a select() on the descriptor
which fails to detect the disconnect. This causes IO.copy_stream to hang,
(possibly until TCP keepalives kick in). IO.copy_stream should raise
immediately.
Attached are:
- a patch to fix the issue
- a script that reproduces the issue with sendfile (under Linux 2.6.34)
=end
Files
sendfile-retry.patch (369 Bytes) sendfile-retry.patch | patch to force a retry immediately to detect error | normalperson (Eric Wong), 07/06/2010 05:12 AM | |
wait_write.rb (548 Bytes) wait_write.rb | script to reproduce the issue without patch under Linux | normalperson (Eric Wong), 07/06/2010 05:12 AM |
Updated by akr (Akira Tanaka) about 14 years ago
=begin
2010/7/6 Eric Wong redmine@ruby-lang.org:
sendfile() may return with a short write upon a client disconnect. Instead of
retrying and getting an error, Ruby tries to force a select() on the descriptor
which fails to detect the disconnect. This causes IO.copy_stream to hang,
(possibly until TCP keepalives kick in). IO.copy_stream should raise
immediately.
Thank you for the reproducible script and fix.
I'll commit your fix.
However I think the Linux select behavior which doesn't notify writability on
disconnected TCP socket is suspicious.
linux% ruby -rsocket -e '
serv = TCPServer.open("127.0.0.1", 8888)
s1 = TCPSocket.open("127.0.0.1", 8888)
s2 = serv.accept
s2.close
s1.write "a" rescue p $!
s1.write "a" rescue p $!
p IO.select(nil, [s1], nil, 0)
'
#<Errno::EPIPE: Broken pipe>
nil
FreeBSD and Solaris notify writability.
freebsd% ruby -rsocket -e '
serv = TCPServer.open("127.0.0.1", 8888)
s1 = TCPSocket.open("127.0.0.1", 8888)
s2 = serv.accept
s2.close
s1.write "a" rescue p $!
s1.write "a" rescue p $!
p IO.select(nil, [s1], nil, 0)
'
#<Errno::EPIPE: Broken pipe>
[[], [#TCPSocket:0x283263d8], []]
solaris% ruby -rsocket -e '
serv = TCPServer.open("127.0.0.1", 8888)
s1 = TCPSocket.open("127.0.0.1", 8888)
s2 = serv.accept
s2.close
s1.write "a" rescue p $!
s1.write "a" rescue p $!
p IO.select(nil, [s1], nil, 0)
'
#<Errno::EPIPE: Broken pipe>
[[], [#TCPSocket:0x80e6e6c], []]
I think select should notify writability when write would not block.
Cleary write doesn't block on disconnected socket.
Linux also notify writability for UNIX domain socket pair.
linux% ruby -rsocket -e '
s1, s2 = UNIXSocket.pair
s2.close
s1.write "a" rescue p $!
p IO.select(nil, [s1], nil, 0)
'
#<Errno::EPIPE: Broken pipe>
[[], [#<UNIXSocket:fd 3>], []]
I tested Linux 2.6.26.¶
Tanaka Akira
=end
Updated by normalperson (Eric Wong) about 14 years ago
=begin
Tanaka Akira akr@fsij.org wrote:
2010/7/6 Eric Wong redmine@ruby-lang.org:
sendfile() may return with a short write upon a client disconnect. Instead of
retrying and getting an error, Ruby tries to force a select() on the descriptor
which fails to detect the disconnect. This causes IO.copy_stream to hang,
(possibly until TCP keepalives kick in). IO.copy_stream should raise
immediately.Thank you for the reproducible script and fix.
I'll commit your fix.
Thank you for looking into this.
However I think the Linux select behavior which doesn't notify writability on
disconnected TCP socket is suspicious.
FreeBSD and Solaris notify writability.
I think select should notify writability when write would not block.
Cleary write doesn't block on disconnected socket.Linux also notify writability for UNIX domain socket pair.
UNIX domain sockets are easy to do notification for since they're always
on the same host. TCP might be harder to detect (and thus the Linux
folks choose not to bother at all) because the client is on a different
machine and it might lose a physical connection.
How does FreeBSD or Solaris behave if a client is on a different machine
and has the network cable pulled out? In the case of physically
disconnected network cable, the client TCP stack has no way to notify
the server of a disconnect. "kill -9" or even normal OS shutdown would
give the TCP stack a chance to properly shutdown the connection.
There are a few more instances of "errno = EAGAIN" assignments in io.c
that look suspicious to me. My proposed fixes are below, but I'm
having trouble reproducing the badness I was seeing with IO.copy_stream
in these code paths:
diff --git a/io.c b/io.c
index 5129a14..108af7e 100644
--- a/io.c
+++ b/io.c
@@ -649,7 +649,7 @@ io_fflush(rb_io_t *fptr)
if (0 <= r) {
fptr->wbuf_off += (int)r;
fptr->wbuf_len -= (int)r;
-
errno = EAGAIN;
-
}goto retry;
if (rb_io_wait_writable(fptr->fd)) {
rb_io_check_closed(fptr);
@@ -877,7 +877,8 @@ io_binwrite(VALUE str, rb_io_t *fptr, int nosync)
if (0 <= r) {
offset += r;
n -= r;
-
errno = EAGAIN;
-
if (offset < RSTRING_LEN(str))
-
goto retry; } if (rb_io_wait_writable(fptr->fd)) { rb_io_check_closed(fptr);
--
Eric Wong
=end
Updated by akr (Akira Tanaka) about 14 years ago
=begin
2010/7/6 Eric Wong normalperson@yhbt.net:
UNIX domain sockets are easy to do notification for since they're always
on the same host. TCP might be harder to detect (and thus the Linux
folks choose not to bother at all) because the client is on a different
machine and it might lose a physical connection.
If the kernel cannot detect disconnect, how the kernel causes EPIPE?
How does FreeBSD or Solaris behave if a client is on a different machine
and has the network cable pulled out? In the case of physically
disconnected network cable, the client TCP stack has no way to notify
the server of a disconnect. "kill -9" or even normal OS shutdown would
give the TCP stack a chance to properly shutdown the connection.
I don't say about such physical disconnection.
I described about the situation that the kernel knows the connection is
disconnected.
The connection is disconnected by RST packet.
The RST packet is generated by a normal packet is sent to closed port.
% ruby -rsocket -e '
def netstat
s = netstat -n
s.each_line {|line| puts line if /State\s*$|127.0.0.1:8888/ =~ line }
puts
end
serv = TCPServer.open("127.0.0.1", 8888)
s1 = TCPSocket.open("127.0.0.1", 8888)
s2 = serv.accept
netstat
s2.close
netstat
s1.write "a" rescue p $!
netstat
s1.write "a" rescue p $!
p IO.select(nil, [s1], nil, 0)
'
Proto Recv-Q Send-Q Local Address Foreign Address
State
tcp 0 0 127.0.0.1:8888 127.0.0.1:34516
ESTABLISHED
tcp 0 0 127.0.0.1:34516 127.0.0.1:8888
ESTABLISHED
Proto Recv-Q Send-Q Local Address Foreign Address
State
tcp 0 0 127.0.0.1:8888 127.0.0.1:34516
FIN_WAIT2
tcp 1 0 127.0.0.1:34516 127.0.0.1:8888
CLOSE_WAIT
Proto Recv-Q Send-Q Local Address Foreign Address
State
#<Errno::EPIPE: Broken pipe>
nil
When first netstat call, the TCP states of
s1 (the local address is 127.0.0.1:8888) and
s2 (the local address is 127.0.0.1:34516) are ESTABLISHED.
s2.close sends a FIN packet to s1.
s1 receives it and send an ACK packet to s2.
This changes s1 to FIN_WAIT_2 and s2 to CLOSE_WAIT.
The first s1.write "a" sends a normal data packet to s2.
Since the write system call doesn't wait the result of the packet,
the system call itself succeeds.
But s2 is CLOSE_WAIT and no data acceptable.
So s2 sends back a RST packet to s1 and change state of s2 to CLOSED.
Then s1 receives the RST packet. It changes the state of s1 to CLOSED.
The second s1.write "a" fails with EPIPE.
This is because the kernel knows s1 is CLOSED.
Now the kernel knows write() for s1 doesn't block.
(It causes an error immediately)
So FreeBSD and Solaris notify it with select().
But Linux doesn't.
I think it is a problem of Linux.
Tanaka Akira
=end
Updated by normalperson (Eric Wong) about 14 years ago
=begin
Tanaka Akira akr@fsij.org wrote:
2010/7/6 Eric Wong normalperson@yhbt.net:
UNIX domain sockets are easy to do notification for since they're always
on the same host. TCP might be harder to detect (and thus the Linux
folks choose not to bother at all) because the client is on a different
machine and it might lose a physical connection.If the kernel cannot detect disconnect, how the kernel causes EPIPE?
How does FreeBSD or Solaris behave if a client is on a different machine
and has the network cable pulled out? In the case of physically
disconnected network cable, the client TCP stack has no way to notify
the server of a disconnect. "kill -9" or even normal OS shutdown would
give the TCP stack a chance to properly shutdown the connection.I don't say about such physical disconnection.
I described about the situation that the kernel knows the connection is
disconnected.The connection is disconnected by RST packet.
The RST packet is generated by a normal packet is sent to closed port.% ruby -rsocket -e '
def netstat
s =netstat -n
s.each_line {|line| puts line if /State\s*$|127.0.0.1:8888/ =~ line }
puts
end
serv = TCPServer.open("127.0.0.1", 8888)
s1 = TCPSocket.open("127.0.0.1", 8888)
s2 = serv.accept
netstat
s2.close
netstat
s1.write "a" rescue p $!
netstat
s1.write "a" rescue p $!
p IO.select(nil, [s1], nil, 0)
'
Proto Recv-Q Send-Q Local Address Foreign Address
State
tcp 0 0 127.0.0.1:8888 127.0.0.1:34516
ESTABLISHED
tcp 0 0 127.0.0.1:34516 127.0.0.1:8888
ESTABLISHEDProto Recv-Q Send-Q Local Address Foreign Address
State
tcp 0 0 127.0.0.1:8888 127.0.0.1:34516
FIN_WAIT2
tcp 1 0 127.0.0.1:34516 127.0.0.1:8888
CLOSE_WAITProto Recv-Q Send-Q Local Address Foreign Address
State#<Errno::EPIPE: Broken pipe>
nilWhen first netstat call, the TCP states of
s1 (the local address is 127.0.0.1:8888) and
s2 (the local address is 127.0.0.1:34516) are ESTABLISHED.s2.close sends a FIN packet to s1.
s1 receives it and send an ACK packet to s2.
This changes s1 to FIN_WAIT_2 and s2 to CLOSE_WAIT.The first s1.write "a" sends a normal data packet to s2.
Since the write system call doesn't wait the result of the packet,
the system call itself succeeds.
But s2 is CLOSE_WAIT and no data acceptable.
So s2 sends back a RST packet to s1 and change state of s2 to CLOSED.
Then s1 receives the RST packet. It changes the state of s1 to CLOSED.The second s1.write "a" fails with EPIPE.
This is because the kernel knows s1 is CLOSED.Now the kernel knows write() for s1 doesn't block.
(It causes an error immediately)
So FreeBSD and Solaris notify it with select().
But Linux doesn't.
I think it is a problem of Linux.
Ah ok, thanks for the clarification. I missed the second write failing
with EPIPE entirely :x
I think my second patch to remove "errno = EAGAIN" assignments might be
needed for some corner cases, too, because we need a second write() to
detect EPIPE under Linux.
--
Eric Wong
=end
Updated by akr (Akira Tanaka) about 14 years ago
- Status changed from Open to Closed
- % Done changed from 0 to 100
=begin
This issue was solved with changeset r28557.
Eric, thank you for reporting this issue.
Your contribution to Ruby is greatly appreciated.
May Ruby be with you.
=end
Updated by normalperson (Eric Wong) about 14 years ago
=begin
Akira Tanaka redmine@ruby-lang.org wrote:
Issue #3540 has been updated by Akira Tanaka.
Status changed from Open to Closed
% Done changed from 0 to 100This issue was solved with changeset r28557.
Can we get this backported to 1.9.2? I noticed it wasn't in rc2.
Malicious clients can exploit this bug and DoS servers this way.
Thanks.
--
Eric Wong
=end